Motors • Switches and Controls • Manufactured / Modular Homes • Recreational Vehicles
Features
Safety Made Simple
• Portable design and user-friendly interface
• Remote Safety Interlock
• Optional Ground Continuity (2503, 2510, 2550)
• Tamper proof front panel controls
2503 - DC Hipot
The 2503 is a 5 KV, 3 mA DC Hipot tester that is designed for quick and easy production line DC Hipot testing. It features a LED display, menu driven parameter control, electronic ramp and dwell and a memory or parameter storage. An optional ground continuity check feature is available.
2510 - AC Hipot
The 2510 is a 5 KV, 10 mA AC Hipot tester that is designed for quick and easy production line testing. Features include an LED display, menu driven parameter control, electronic ramp and dwell and a memory for parameter storage. An optional ground continuity check feature is available.
2525 - AC Hipot, Ground Continuity, 500VA
2550 - AC Hipot, DC Hipot
The 2550 is a 5 KV, 10 mA AC and a 5 KV, 3 mA DC Hipot tester that is designed for quick and easy production line Hipot testing. It features a LED display, menu driven parameter control, electronic ramp and dwell and a memory for parameter storage. An optional ground continuity check feature is available.
Model
2503
2510
2525
2550
DC Hipot
AC Hipot
AC Hipot, Ground Continuity, 500VA
AC Hipot, DC Hipot
Input
Voltage
115/230V selectable +/- 15%
115/230V selectable +/- 15%
-
115/230V selectable +/- 15%
Frequency
47 ~ 63 Hz
47 ~ 63 Hz
-
47 ~ 63 Hz
Fuse
115VAC, 230VAC 2A fast acting 250VAC
115VAC, 230VAC 2A fast acting 250VAC
115VAC, 230VAC 15A fast acting 250VAC
115VAC, 230VAC 2A fast acting 250VAC
Dielectric Withstand Test mode
Output
DC 0 – 5000 V, 3 mA
AC 0 – 5000 V, 10 mA
AC 0 – 5000V, 10V / step, 100mA
AC 0 – 5000 V, 10 mA; DC 0 – 5000 V, 3 mA
- Regulation
± (1 % of output + 5V)
Voltage Setting
- Range
0.01 kV – 5 kV
0.01 kV – 5 kV
-
0.01 kV – 5 kV
- Resolution
10 volts/step
- Accuracy
± (2 % of Setting + 5 V) (relative to displayed output). Can be adjusted during operation via Up & Down Arrow keys.
Ripple
< 5 % at 5 kVDC / 3 mA
-
-
< 5 % at 5 kVDC / 3 mA
Dwell Time
0, 1 or 60, 0 for continuous running
0, 1 or 60, 0 for continuous running
0 and 0.2 – 999.9 seconds, 0.1 second /
step “0” for continuous running
The following input & output signals are provided through the 9 pin D type connector: 1. Remote control: test, reset & interlock. 2. Outputs: pass, fail & test in process.
Line Cord
Detachable 6’ (1.80 m) power cable terminated in a three prong grounding plug.
Terminations
6’ (1.80 m) high voltage safety retracting probe, 6’ (1.80 m) high voltage clip probe & 6’ (1.80 m) return clip lead.
Dimensions (W x H x D)
4.75” x 5.75” x 14.50”
(120 x 146 x 370 mm)
4.75” x 5.75” x 14.50”
(120 x 146 x 370 mm)
17” x 5.8” x 12”
(432 x 147 x 305mm)
4.75” x 5.75” x 14.50”
(120 x 146 x 370 mm)
Weight
16.5 lbs. (7.5 kgs)
16.5 lbs. (7.5 kgs)
56.70 Lbs. (25.92 kgs)
16.5 lbs. (7.5 kgs)
2900 Series Hipot Testers
Relevant Applications
• Appliance • Lighting & LED Testing • Power Tools • Motors & Pumps
Features:
• Intuitive user interface
• 10 programmable memories
• Tamper proof front panel controls
• Includes Continuity test function
• Automate with PLC control or optional RS-232 interface
• Remote Safety Interlock
2955 - AC Hipot, Ground Continuity
Featuring our most advanced technology, the 2955 is a 5 KV, 12 mA AC Hipot tester that allows manufacturers to quickly and cost-effectively perform AC Hipot tests. It includes features such as a liquid crystal display, menu driven parameter control, electronic ramp, fully adjustable electronic dwell, fully adjustable Continuity test mode, 10 test set up memories, front panel lockout, standard remote safety interlock and an optional RS-232 interface. The 2955 is also NRTL safety agency listed.
2965 - AC Hipot, DC Hipot, Ground Continuity
Featuring our most advanced technology, the 2965 is a 5 KV, 12 mA AC and 6 KV, 5 mA DC Hipot tester that allows manufacturers to quickly and easily perform AC or DC Hipot tests. It includes features such as a liquid crystal display, menu driven parameter control, electronic ramp, fully adjustable electronic dwell, fully adjustable Continuity test mode, 10 test set up memories, front panel lockout, standard remote safety interlock and an optional RS-232 interface. The 2965 is also NRTL safety agency listed.
2975 - AC Hipot, DC Hipot, Ground Continuity, Insulation Resistance
Featuring our most advanced technology, the 2975 is a 3-in-1 Hipot tester that will perform AC, DC Hipot with a built-in Insulation Resistance tester. It will perform a 5 KV, 12 mA AC and a 6 KV, 5 mA DC Hipot test. It includes features such as a liquid crystal display, menu driven parameter control, electronic ramp, fully adjustable electronic dwell, fully adjustable electronic dwell, fully adjustable Continuity test mode, 10 test set up memories, front panel lockout, standard remote safety interlock and an optional RS-232 interface. The 2975 is also NRTL safety agency listed.
Model
2955
2965
2975
AC Hipot, Ground Continuity
AC Hipot, DC Hipot, Ground Continuity
AC Hipot, DC Hipot, Ground Continuity, Insulation Resistance
Input
Voltage
115/230V selectable +/- 15%
Frequency
50/60 Hz ± 5%
Fuse
2 A / 250 V fast acting 250 VAC
Dielectric Withstand Test mode
Output
- AC
AC 0 - 5000 V, 2 V/step, 12 mA
- DC
-
DC 0 - 6000 V, 2 V/step, 5 mA
DC 0 - 6000 V, 2 V/step, 5 mA
- Regulation
± (1% of output + 5 V)
Voltage Setting
- Range
0 V - max output rating, 10 V/step
- Resolution
0.01 kV
- Accuracy
± (2% of setting + 5 V) relative to displayed output, can be adjusted during operation via UP and DOWN arrow keys
AC Output Frequency
50/60 Hz user selectable
AC Wave Form
Sine Wave
AC Distortion
<2% THD
DC Ripple
-
<5% at 6 kVDC / 5 mA
<5% at 6 kVDC / 5 mA
Dwell Time - Range
0 and 0.2 - 999.9 seconds
0.1 sec/step
0 for continuous running
± (3% of reading + 2 counts) at test voltage > 500 V
± (7% of reading + 2 counts) at test voltage ≤ 500 V
High Limit Range
0 - 1000 MΩ (0 = off)
Low Limit Range
1 - 1000 MΩ
Delay Timer
- Range
0, 0.5 – 999.9 sec (0 = constant)
- Resolution
0.1 sec
- Accuracy
± (0.1% of reading + 0.05 sec)
General Specifications
Remote Control and Signal Output
The following input and output signals are provided through the 9-pin D-type connector:
1. Remote control: Test, Reset & Interlock
2. Outputs: Pass, Fail, Test-in-Process
Memories
10 memories
Security
Lockout capability to avoid unauthorized access to all test parameters. Memory lockout to avoid unauthorized access to memory locations.
Interlock
Remote safety interlock standard.
Calibration
Software and adjustments made through front panel.
Line Cord
Detachable 6’ (1.80 m) power cable terminated
in a three prong grounding plug
Interface
Optional RS-232 interface
Mechanical
Tilt up front feet
Dimensions (W x H x D)
11” x 3.5” x 11.81” (280 x 89 x 300 mm)
Weight
20 lbs. (9 kg)
1300 Series Hipot Testers
Relevant Applications
• Motors • Manufactured / Modular Homes • Recreational Vehicles
± (2% of setting + 5 V) relative to displayed output
Dwell Setting
On, HV remains on after “TEST” button is pushed
0.0 sec, 1.0 sec, 60.0 sec, off
0.0 for continous running
Off, HV present only when “TEST” button
is pushed
OFF: HV present only when “TEST” button
is pushed
Ramp/ Pulse Setting
On, Automatic reset after failure for
continuous testing. (Not for Compliance
Testing)
PULSE: automatic reset after failure for
continous testing.
Range: Pulse, 0.1 – 999.9 sec
Resolution: 0.1 second/step
Accuracy: ± (0.1% + 0.05 sec)
Not for compliance testing
Failure Setting
-High Limit
0.00 – 5.00 mA
0.00 – 40.00 mA,
0.00 – 10.00 mA when PULSE mode is activated
-Resoultion
0.01 mA / Step
0.01 mA / step
-Accuracy
± (2 % of setting + 0.02 mA)
± (2% of setting + 0.02 mA)
Metering (4 digits)
Voltmeter
- Range
AC 0.00 – 3.00 kV
0.00 – 2.50 kV
- Resolution
0.01 kV
0.01 kV
- Accuracy
± (2 % of reading + 10 V)
± (2% of reading + 10 volts)
Ammeter
- Range
0.00 – 40.00 mA,
0.00 – 10.00 mA when
PULSE mode is activated
-Resolution
0.01 mA
-Accuracy
± (2% of reading + 0.02 mA)
Timer
- Range
0.0 – 999.9 sec
- Resolution
0.1 sec
- Accuracy
± (0.1% of reading + 0.05 sec)
General Specifications
Remote Control
The following input and output signals are provided through the 9-pin D-type connector:
Test Input
Test, reset, and interlock
Outputs: pass, fail, and test-in-process
Optional Ground Continuity Check
Max Ground Resistance: 1 Ω ± 0.1 Ω, fixed
Calibration
Software and adjustments made through front panel.
Mechanical
Bench top model
Line Cord
Detachable 6’ (1.80 m) power cable terminated
in a three prong grounding plug
Terminations
6’ (1.80 m) high voltage safety retracting probe
6’ (1.80 m) high voltage clip probe
6’ (1.80 m) return clip lead
Tilt up front feet
Dimensions (W x H x D)
4.75” x 5.75” x 14.5” (120 x 146 x 370 mm)
Weight
16.0 lbs. (7.25 kgs)
20 lbs. (9 kg)
2200 Series Hipot Testers
The 2205 is stand-alone Insulation Resistance tester designed for use on the production line or in the field. With measurements up to 200 GΩ at voltages up to 1000 VDC, the 2205 can satisfy even the most demanding application requirements. We’ve incorporated the most user-friendly interface in the industry and a portable design for safe and easy testing.
Relevant Applications
• Motors • Switches and Controls • Cable and Harness • Aerospace
Features
• Portable design
• User-friendly interface
• Automate with PLC control
• Remote Safety Interlock
Model
2205
Insulation Resistance
Input
Voltage
115/230V selectable +/- 15%
Frequency
50/60 Hz ± 5%
Fuse
1A / 250 V fast acting
Insulation Resistance Test
Output Voltage
- Range
30 - 1000 VDC
- Resolution
1 Volt
- Accuracy
± (1% of Setting + 1 V) (relative to displayed output)
- Ripple
< 2%
Voltage Display
- Low Range
0.0 V - 100.0 VDC
- High Range
101 V - 1000 VDC
- Resolution
0.1 V (low range), 1 V (high range)
- Accuracy
± (2% of reading + 2 V)
Resistance Display
-Range
0.01 MΩ - 200.0 GΩ (4 digit, auto ranging)
-Resolution
300-499V
500-1000V
.001 MΩ - .1 MΩ
0.1 MΩ – 1 GΩ
0.1 MΩ – 1 GΩ
1 MΩ - .01 GΩ
1 GΩ – 20 GΩ
1 GΩ – 20 GΩ
0.1 GΩ
20 GΩ – 200 GΩ
-Accuracy
300-499V
500-1000V
0.1MΩ-1GΩ ± (3% of reading + 2 counts)
0.1MΩ-1GΩ ± (2% of reading + 2 counts)
1-20GΩ ± (5% of reading + 2 counts)
1-20GΩ ± (3% of reading + 2 counts)
20-200GΩ ± (10% of reading + 2 counts)
Timer Display
-Range
0.0 - 999.9 seconds
-Resolution
0.1 second
-Accuracy
± (0.1% of reading + 0.05 seconds)
Failure Settings
-Low Limit
0.1 MΩ - 999.9 MΩ
1000 MΩ - 9999 MΩ
10.0 GΩ - 200.0 GΩ
Dwell Time Setting
1.0 - 999.9 seconds, 0.1 second / step
“0” for continuous running
Delay Time Setting
0.1 - 999.9 seconds, 0.1 second / step
Discharge
Automatic Discharge of Device Under Test
Indicator: Green < 30 V, Red > 30 V
General Specifications
PLC Remote Control
The following input and output signals are provided through the 9-pin D-type connector:
1. Inputs: test , reset, safety interlock
2. Outputs: pass, fail and test in progress
Line Cord
Detachable 6’ (1.80 m) power cable terminated in a three prong grounding plug
Terminations
High Voltage Output: Alden Socket
Shielded Return: BNC Connector
Dimensions (W x H x D)
4.75” x 5.25” x 11.75” (120 x 133 x 300 mm)
Calibration
Software & adjustments made through front panel
Weight
11 lbs. (5 kg)
* Products not listed can be ordered as per request.
